Customized Size 5052 H112 Aluminum Bar

Grade: 5052

Temper: H112

Diameter: 4.0mm-560mm

FOB Price: US $0.5 - 9,999 / Piece

Min.Order Quantity: 100 Piece/Pieces

Supply Ability: 10000 Piece/Pieces per Month

Send email to us

Product Detail

Product Tags

5052 AL-Mg aluminum rod is the most widely used anti-rust aluminum,This alloy has a high strength, especially for its fatigue resistance strength:High plasticity and corrosion resistance, can not be strengthened by heat treatment, in the semi-cold hardening when good plasticity, cold hardening when low plasticity, good corrosion resistance, good weldability, poor cutting performance, can be polished.

5052 Aluminum rod is mainly used for demanding high plasticity and good weldability,Low-load parts operating in a liquid or gaseous media,Such as mailboxes, gasoline or lubricant catheters, various liquid containers and other small load parts made with deep pull:Wire material is used for rivets. It is also commonly used in traffic vehicles, ships, sheet metal parts, meters, street lamp supports and rivets, hardware products, electrical shell and so on.

Aluminum Bar is lightweight, ductile, conductive, and recyclable. With these properties, Aluminum bar can be used in different industries, such as aerospace, automobile, construction, and transportation.

✧ Mechanical Properties

Tensile Strength		Yield Strength			Hardness
170 ~305 Mpa		σ0.2(MPa)≥65			120 ~ 160HB

✧ Product Specification and Size

Standard Specification: GB/T 3880, ASTM B209, EN485

Alloy and Temper
Alloy			Temper
1xxx: 1050, 1060, 1100			O, H12, H14, H16, H18, H22, H24, H26, H28, H111
2xxx: 2024, 2219, 2014			T3, T351, T4
3xxx: 3003, 3004, 3105			O, H12, H14, H16, H18, H22, H24, H26, H28, H111
5xxx: 5052, 5754, 5083			O, H22, H24, H26, H28, H32, H34, H36, H38, H111
6xxx: 6061, 6063, 6082			T4, T6, T451, T651
7xxx: 7075, 7050, 7475			T6, T651, T7451

✧ Temper Designation

Temper	Defintion
O	Annealed
H111	Annealed and slightly strain hardened (less than H11)
H12	Strain Hardened, 1/4 Hard
H14	Strain Hardened, 1/2 Hard
H16	Strain Hardened, 3/4 Hard
H18	Strain Hardened, Full Hard
H22	Strain Hardened and Partially Annealed, 1/4 Hard
H24	Strain Hardened and Partially Annealed, 1/2 Hard
H26	Strain Hardened and Partially Annealed, 3/4 Hard
H28	Strain Hardened and Partially Annealed, Full Hard
H32	Strain Hardened and Stabilized, 1/4 Hard
H34	Strain Hardened and Stabilized, 1/2 Hard
H36	Strain Hardened and Stabilized, 3/4 Hard
H38	Strain Hardened and Stabilized, Full Hard
T3	Solution heat-treated, cold worked and naturally aged
T351	Solution heat-treated, cold worked, stress-relieved by stretching and naturally aged
T4	Solution heat-treated and naturally aged
T451	Solution heat-treated, stress-relieved by stretching and naturally aged
T6	Solution heat-treated and then artificially aged
T651	Solution heat-treated, stress-relieved by stretching and artificially aged

✧ Available Size Range

Dimesion		Range
Thickness		0.5 ~ 560 mm
Width		25 ~ 2200 mm
Length		100 ~ 10000 mm

Standard Width and Length: 1250x2500 mm, 1500x3000 mm, 1520x3020 mm, 2400x4000 mm.
Surface Finish: Mill finish (unless otherwise specified), Color Coated, or Stucco Embossed.
Surface Protection: Paper interleaved, PE/PVC filming (if specified).
Minimum Order Quantity: 1 Piece For Stock Size, 3MT Per Size For Custom Order.

✧ Available Size Range

Aluminum bar is used in various applications, including aerospace, military, transportation, etc. Aluminum bar is also used for tanks in many food industries, because some aluminum alloys become tougher at low temperatures.

Type	Application
Food Packaging	Beverage can end, can tap, cap stock, etc.
Construction	Curtain walls, cladding, ceiling, heat insulation and venetian blind block, etc.
Transportation	Automobile parts, bus bodies, aviation and shipbuilding and air cargo containers, etc.
Electronic Appliance	Electrical appliances, telecommunication equipment, PC board drilling guide sheets, lighting and heat radiating materials, etc.
Consumer Goods	Parasols and umbrellas, cooking utensils, sports equipment, etc.
Other	Military, color coated aluminum sheet