Custom 6061 T6 T651 Aluminum 5mm 6mm Thick Aluminum Sheet
6061 Aluminum alloy is a thermal reinforced alloy,With good plasticity, weldability, processability and moderate strength, after annealing can still maintain a good processing performance, is a wide range of use,A very promising alloy,Can be anodized coloring, can also be painted on enamel,Adapted to the building decoration materials and ship manufacturing, etc.It contains a small amount of Cu and thus has a higher strength than 6063,But the quenching sensitivity was also higher than that of 6063,After extrusion, air quenching cannot be realized, and re-solution treatment and quenching time are needed to obtain high aging.
6061 The main alloy elements of aluminum are magnesium and silicon, which form the Mg2Si phase.If it contains a certain amount of manganese and chromium, it can neutralize the adverse effects of iron;Sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance;There are also few conductive materials to offset the adverse effects of titanium and iron on the conductivity; zirconium or titanium can refine the grains and control the recrystallization structure;To improve the processing performance, lead and bismuth can be added. Mg2Si Solid dissolved in aluminum, so that the alloy has the artificial aging hardening function.
Aluminum Sheet / Plate is lightweight, ductile, conductive, and recyclable. With these properties, Aluminum Sheet / Plate can be used in different industries, such as aerospace, automobile, construction, and transportation.
✧ Mechanical Properties
| Tensile Strength | Yield Strength | Hardness | |||||
| ≥180 Mpa | ≥110 Mpa | 95—100HB | |||||
✧ Product Specification and Size
Standard Specification: GB/T 3880, ASTM B209, EN485
| Alloy and Temper | |||||||
| Alloy | Temper | ||||||
| 1xxx: 1050, 1060, 1100 | O, H12, H14, H16, H18, H22, H24, H26, H28, H111 | ||||||
| 2xxx: 2024, 2219, 2014 | T3, T351, T4 | ||||||
| 3xxx: 3003, 3004, 3105 | O, H12, H14, H16, H18, H22, H24, H26, H28, H111 | ||||||
| 5xxx: 5052, 5754, 5083 | O, H22, H24, H26, H28, H32, H34, H36, H38, H111 | ||||||
| 6xxx: 6061, 6063, 6082 | T4, T6, T451, T651 | ||||||
| 7xxx: 7075, 7050, 7475 | T6, T651, T7451 | ||||||
✧ Temper Designation
| Temper | Defintion | ||||||
| O | Annealed | ||||||
| H111 | Annealed and slightly strain hardened (less than H11) | ||||||
| H12 | Strain Hardened, 1/4 Hard | ||||||
| H14 | Strain Hardened, 1/2 Hard | ||||||
| H16 | Strain Hardened, 3/4 Hard | ||||||
| H18 | Strain Hardened, Full Hard | ||||||
| H22 | Strain Hardened and Partially Annealed, 1/4 Hard | ||||||
| H24 | Strain Hardened and Partially Annealed, 1/2 Hard | ||||||
| H26 | Strain Hardened and Partially Annealed, 3/4 Hard | ||||||
| H28 | Strain Hardened and Partially Annealed, Full Hard | ||||||
| H32 | Strain Hardened and Stabilized, 1/4 Hard | ||||||
| H34 | Strain Hardened and Stabilized, 1/2 Hard | ||||||
| H36 | Strain Hardened and Stabilized, 3/4 Hard | ||||||
| H38 | Strain Hardened and Stabilized, Full Hard | ||||||
| T3 | Solution heat-treated, cold worked and naturally aged | ||||||
| T351 | Solution heat-treated, cold worked, stress-relieved by stretching and naturally aged | ||||||
| T4 | Solution heat-treated and naturally aged | ||||||
| T451 | Solution heat-treated, stress-relieved by stretching and naturally aged | ||||||
| T6 | Solution heat-treated and then artificially aged | ||||||
| T651 | Solution heat-treated, stress-relieved by stretching and artificially aged | ||||||
✧ Available Size Range
| Dimesion | Range | ||||||
| Thickness | 0.5 ~ 560 mm | ||||||
| Width | 25 ~ 2200 mm | ||||||
| Length | 100 ~ 10000 mm | ||||||
Standard Width and Length: 1250x2500 mm, 1500x3000 mm, 1520x3020 mm, 2400x4000 mm.
Surface Finish: Mill finish (unless otherwise specified), Color Coated, or Stucco Embossed.
Surface Protection: Paper interleaved, PE/PVC filming (if specified).
Minimum Order Quantity: 1 Piece For Stock Size, 3MT Per Size For Custom Order.
✧ Available Size Range
Aluminum sheet or plate is used in various applications, including aerospace, military, transportation, etc. Aluminum sheet or plate is also used for tanks in many food industries, because some aluminum alloys become tougher at low temperatures.
| Type | Application | ||||||
| Food Packaging | Beverage can end, can tap, cap stock, etc. | ||||||
| Construction | Curtain walls, cladding, ceiling, heat insulation and venetian blind block, etc. | ||||||
| Transportation | Automobile parts, bus bodies, aviation and shipbuilding and air cargo containers, etc. | ||||||
| Electronic Appliance | Electrical appliances, telecommunication equipment, PC board drilling guide sheets, lighting and heat radiating materials, etc. | ||||||
| Consumer Goods | Parasols and umbrellas, cooking utensils, sports equipment, etc. | ||||||
| Other | Military, color coated aluminum sheet | ||||||
✧ Aluminum Plate Packaging
-
e99447-cp Custom 6 Series T6 T651 Aluminum Plate
see more -
e99447-cp China Supplier 6061 T6 T651 Aluminum Sheet For ...
see more -
e99447-cp 6063 aluminum plate for aerospace industrial ai...
see more -
e99447-cp Customized high strength aluminum plate 6082 T6...
see more -
e99447-cp CNC custom machining service 6061 6082 6063 707...
see more -
e99447-cp Aluminum Sheet / Plate
see more