6061 Aluminum is a heat treatment reinforcing alloy, which has good formability, weldability, machining ability, and medium strength, and can still maintain good operation after annealing. 6061 The main alloy elements of aluminum are magnesium and silicon, and form the Mg2Si phase.With a certain amount of manganese and chromium, it can neutralize the bad effect of iron; sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance;Small copper in the conductive material to offset the adverse effects of titanium and iron on conductivity; zirconium or titanium can refine grains and control recrystallization tissue; and to improve cutting properties, lead and bismuth can be added. In Mg2Si fixed in aluminum, the alloy has artificial aging hardening function.
Tensile Strength | Yield Strength | Hardness | |||||
≥205 Mpa | ≥110 Mpa | 30~95HB |
Standard Specification: GB/T 3880, ASTM B209, EN485
Alloy and Temper | |||||||
Alloy | Temper | ||||||
1xxx: 1050, 1060, 1100 | O, H12, H14, H16, H18, H22, H24, H26, H28, H111 | ||||||
2xxx: 2024, 2219, 2014 | T3, T351, T4 | ||||||
3xxx: 3003, 3004, 3105 | O, H12, H14, H16, H18, H22, H24, H26, H28, H111 | ||||||
5xxx: 5052, 5754, 5083 | O, H22, H24, H26, H28, H32, H34, H36, H38, H111 | ||||||
6xxx: 6061, 6063, 6082 | T4, T6, T451, T651 | ||||||
7xxx: 7075, 7050, 7475 | T6, T651, T7451 |
Temper | Defintion | ||||||
O | Annealed | ||||||
H111 | Annealed and slightly strain hardened (less than H11) | ||||||
H12 | Strain Hardened, 1/4 Hard | ||||||
H14 | Strain Hardened, 1/2 Hard | ||||||
H16 | Strain Hardened, 3/4 Hard | ||||||
H18 | Strain Hardened, Full Hard | ||||||
H22 | Strain Hardened and Partially Annealed, 1/4 Hard | ||||||
H24 | Strain Hardened and Partially Annealed, 1/2 Hard | ||||||
H26 | Strain Hardened and Partially Annealed, 3/4 Hard | ||||||
H28 | Strain Hardened and Partially Annealed, Full Hard | ||||||
H32 | Strain Hardened and Stabilized, 1/4 Hard | ||||||
H34 | Strain Hardened and Stabilized, 1/2 Hard | ||||||
H36 | Strain Hardened and Stabilized, 3/4 Hard | ||||||
H38 | Strain Hardened and Stabilized, Full Hard | ||||||
T3 | Solution heat-treated, cold worked and naturally aged | ||||||
T351 | Solution heat-treated, cold worked, stress-relieved by stretching and naturally aged | ||||||
T4 | Solution heat-treated and naturally aged | ||||||
T451 | Solution heat-treated, stress-relieved by stretching and naturally aged | ||||||
T6 | Solution heat-treated and then artificially aged | ||||||
T651 | Solution heat-treated, stress-relieved by stretching and artificially aged |
Dimesion | Range | ||||||
Thickness | 0.5 ~ 560 mm | ||||||
Width | 25 ~ 2200 mm | ||||||
Length | 100 ~ 10000 mm |
Standard Width and Length: 1250x2500 mm, 1500x3000 mm, 1520x3020 mm, 2400x4000 mm.
Surface Finish: Mill finish (unless otherwise specified), Color Coated, or Stucco Embossed.
Surface Protection: Paper interleaved, PE/PVC filming (if specified).
Minimum Order Quantity: 1 Piece For Stock Size, 3MT Per Size For Custom Order.
Aluminum sheet or plate is used in various applications, including aerospace, military, transportation, etc. Aluminum sheet or plate is also used for tanks in many food industries, because some aluminum alloys become tougher at low temperatures.
Type | Application | ||||||
Food Packaging | Beverage can end, can tap, cap stock, etc. | ||||||
Construction | Curtain walls, cladding, ceiling, heat insulation and venetian blind block, etc. | ||||||
Transportation | Automobile parts, bus bodies, aviation and shipbuilding and air cargo containers, etc. | ||||||
Electronic Appliance | Electrical appliances, telecommunication equipment, PC board drilling guide sheets, lighting and heat radiating materials, etc. | ||||||
Consumer Goods | Parasols and umbrellas, cooking utensils, sports equipment, etc. | ||||||
Other | Military, color coated aluminum sheet |