7075 T6 T6511 Aluminum Alloy Round Bar

Grade: 7075

Temper: T6, T6511

Diameter: 5.0mm-420mm

FOB Price: US $0.5 - 9,999 / Piece

Min.Order Quantity: 100 Piece/Pieces

Supply Ability: 10000 Piece/Pieces per Month

Send email to us

Product Detail

Product Tags

7075 Aluminum is known as the ultra-high strength aluminum alloy,Alalloy yield strength close to the tensile strength,Yield a high ratio, and has a high specific strength,However, the plasticity and high-temperature intensity were low,Should do normal temperature,Bearing bearing structure used below 120℃,The alloy is easy to process, and has good corrosion resistance and high toughness.The alloy is widely used in the aviation and aerospace fields, and has become one of the most important structural materials in this field.

Aluminum bar is lightweight, ductile, conductive, and recyclable. With these properties, Aluminum bar can be used in different industries, such as aerospace, automobile, construction, and transportation.

✧ Mechanical Properties

Tensile Strength		Yield Strength			Hardness
524 Mpa		455 Mpa			150HB

✧ Product Specification and Size

Standard Specification: GB/T 3880, ASTM B209, EN485

Alloy and Temper
Alloy			Temper
1xxx: 1050, 1060, 1100			O, H12, H14, H16, H18, H22, H24, H26, H28, H111
2xxx: 2024, 2219, 2014			T3, T351, T4
3xxx: 3003, 3004, 3105			O, H12, H14, H16, H18, H22, H24, H26, H28, H111
5xxx: 5052, 5754, 5083			O, H22, H24, H26, H28, H32, H34, H36, H38, H111
6xxx: 6061, 6063, 6082			T4, T6, T451, T651
7xxx: 7075, 7050, 7475			T6, T651, T7451

✧ Temper Designation

Temper	Defintion
O	Annealed
H111	Annealed and slightly strain hardened (less than H11)
H12	Strain Hardened, 1/4 Hard
H14	Strain Hardened, 1/2 Hard
H16	Strain Hardened, 3/4 Hard
H18	Strain Hardened, Full Hard
H22	Strain Hardened and Partially Annealed, 1/4 Hard
H24	Strain Hardened and Partially Annealed, 1/2 Hard
H26	Strain Hardened and Partially Annealed, 3/4 Hard
H28	Strain Hardened and Partially Annealed, Full Hard
H32	Strain Hardened and Stabilized, 1/4 Hard
H34	Strain Hardened and Stabilized, 1/2 Hard
H36	Strain Hardened and Stabilized, 3/4 Hard
H38	Strain Hardened and Stabilized, Full Hard
T3	Solution heat-treated, cold worked and naturally aged
T351	Solution heat-treated, cold worked, stress-relieved by stretching and naturally aged
T4	Solution heat-treated and naturally aged
T451	Solution heat-treated, stress-relieved by stretching and naturally aged
T6	Solution heat-treated and then artificially aged
T651	Solution heat-treated, stress-relieved by stretching and artificially aged

✧ Available Size Range

Dimesion		Range
Thickness		0.5 ~ 560 mm
Width		25 ~ 2200 mm
Length		100 ~ 10000 mm

Standard Width and Length: 1250x2500 mm, 1500x3000 mm, 1520x3020 mm, 2400x4000 mm.
Surface Finish: Mill finish (unless otherwise specified), Color Coated, or Stucco Embossed.
Surface Protection: Paper interleaved, PE/PVC filming (if specified).
Minimum Order Quantity: 1 Piece For Stock Size, 3MT Per Size For Custom Order.

✧ Available Size Range

Aluminum bar is used in various applications, including aerospace, military, transportation, etc. Aluminum bar is also used for tanks in many food industries, because some aluminum alloys become tougher at low temperatures.

Type	Application
Food Packaging	Beverage can end, can tap, cap stock, etc.
Construction	Curtain walls, cladding, ceiling, heat insulation and venetian blind block, etc.
Transportation	Automobile parts, bus bodies, aviation and shipbuilding and air cargo containers, etc.
Electronic Appliance	Electrical appliances, telecommunication equipment, PC board drilling guide sheets, lighting and heat radiating materials, etc.
Consumer Goods	Parasols and umbrellas, cooking utensils, sports equipment, etc.
Other	Military, color coated aluminum sheet