2024 Aluminum rod belongs to high strength hard aluminum, which can be strengthened by heat treatment,In quenching and rigid quenching state plastic moderate, spot welding good,The tendency to form intercrystalline cracks with gas welding,The alloy properties is good after quenching and cold hardening,Low cutting after annealing,Low corrosion resistance,Anoodic oxidation and coating or aluminum layer are often used to improve its corrosion resistance.
2024 It is mainly used for making a variety of high-load parts and components(But not including stamping forgings)Such as the skeleton parts on the aircraft, skin, frame, wing ribs, wing beams, rivets and other working parts below 150℃.
Aluminum bar is lightweight, ductile, conductive, and recyclable. With these properties, Aluminum bar can be used in different industries, such as aerospace, automobile, construction, and transportation.
Tensile Strength | Yield Strength | Hardness | |||||
470 Mpa | 325 Mpa | 120NB |
Standard Specification: GB/T 3880, ASTM B209, EN485
Alloy and Temper | |||||||
Alloy | Temper | ||||||
1xxx: 1050, 1060, 1100 | O, H12, H14, H16, H18, H22, H24, H26, H28, H111 | ||||||
2xxx: 2024, 2219, 2014 | T3, T351, T4 | ||||||
3xxx: 3003, 3004, 3105 | O, H12, H14, H16, H18, H22, H24, H26, H28, H111 | ||||||
5xxx: 5052, 5754, 5083 | O, H22, H24, H26, H28, H32, H34, H36, H38, H111 | ||||||
6xxx: 6061, 6063, 6082 | T4, T6, T451, T651 | ||||||
7xxx: 7075, 7050, 7475 | T6, T651, T7451 |
Temper | Defintion | ||||||
O | Annealed | ||||||
H111 | Annealed and slightly strain hardened (less than H11) | ||||||
H12 | Strain Hardened, 1/4 Hard | ||||||
H14 | Strain Hardened, 1/2 Hard | ||||||
H16 | Strain Hardened, 3/4 Hard | ||||||
H18 | Strain Hardened, Full Hard | ||||||
H22 | Strain Hardened and Partially Annealed, 1/4 Hard | ||||||
H24 | Strain Hardened and Partially Annealed, 1/2 Hard | ||||||
H26 | Strain Hardened and Partially Annealed, 3/4 Hard | ||||||
H28 | Strain Hardened and Partially Annealed, Full Hard | ||||||
H32 | Strain Hardened and Stabilized, 1/4 Hard | ||||||
H34 | Strain Hardened and Stabilized, 1/2 Hard | ||||||
H36 | Strain Hardened and Stabilized, 3/4 Hard | ||||||
H38 | Strain Hardened and Stabilized, Full Hard | ||||||
T3 | Solution heat-treated, cold worked and naturally aged | ||||||
T351 | Solution heat-treated, cold worked, stress-relieved by stretching and naturally aged | ||||||
T4 | Solution heat-treated and naturally aged | ||||||
T451 | Solution heat-treated, stress-relieved by stretching and naturally aged | ||||||
T6 | Solution heat-treated and then artificially aged | ||||||
T651 | Solution heat-treated, stress-relieved by stretching and artificially aged |
Dimesion | Range | ||||||
Thickness | 0.5 ~ 560 mm | ||||||
Width | 25 ~ 2200 mm | ||||||
Length | 100 ~ 10000 mm |
Standard Width and Length: 1250x2500 mm, 1500x3000 mm, 1520x3020 mm, 2400x4000 mm.
Surface Finish: Mill finish (unless otherwise specified), Color Coated, or Stucco Embossed.
Surface Protection: Paper interleaved, PE/PVC filming (if specified).
Minimum Order Quantity: 1 Piece For Stock Size, 3MT Per Size For Custom Order.
Aluminum bar or plate is used in various applications, including aerospace, military, transportation, etc. Aluminum bar or plate is also used for tanks in many food industries, because some aluminum alloys become tougher at low temperatures.
Type | Application | ||||||
Food Packaging | Beverage can end, can tap, cap stock, etc. | ||||||
Construction | Curtain walls, cladding, ceiling, heat insulation and venetian blind block, etc. | ||||||
Transportation | Automobile parts, bus bodies, aviation and shipbuilding and air cargo containers, etc. | ||||||
Electronic Appliance | Electrical appliances, telecommunication equipment, PC board drilling guide sheets, lighting and heat radiating materials, etc. | ||||||
Consumer Goods | Parasols and umbrellas, cooking utensils, sports equipment, etc. | ||||||
Other | Military, color coated aluminum sheet |